Common Pool Plaster Problems: What Pool Services Need to Know

As a pool service provider, you know that pool plaster plays a crucial role in maintaining the appearance and functionality of a swimming pool. However, despite its durability, pool plaster can experience various issues over time, leading to costly repairs or even pool renovation. Here are some of the most common Pool Plaster  problems that pool services encounter:

  1. Stains: Pool plaster can develop unsightly stains over time due to various factors such as algae growth, metal deposits, or chemical imbalances. Stains can detract from the appearance of the pool, making it look dirty and uninviting.
  2. Cracks: Cracks in pool plaster can occur due to various reasons such as ground movement, age, or improper installation. Cracks not only detract from the pool’s appearance but can also cause leaks that can lead to water loss and damage to the surrounding areas.
  3. Chipping: Pool plaster can chip or flake due to excessive wear and tear, age, or improper pool maintenance. Chipping not only detracts from the pool’s appearance but can also lead to further damage and roughness of the pool surface.
  4. Scaling: Scaling occurs when calcium deposits form on the pool plaster surface due to imbalanced water chemistry or high calcium levels in the pool water. Scaling can make the pool surface rough and uncomfortable for swimmers, as well as make the pool look unappealing.
  5. Etching: Etching occurs when the pool plaster surface becomes pitted or rough due to improper pool chemistry or prolonged exposure to acidic pool water. Etching can make the pool surface uncomfortable for swimmers and can also detract from the pool’s appearance.

Regular pool maintenance, including proper water chemistry and cleaning, can help to prevent these problems from occurring. If these issues persist or become severe, it’s very important to seek professional pool repair services to restore the pool’s appearance and functionality.In conclusion, understanding the common pool plaster problems can help pool services provide better care for their clients’ swimming pools. By addressing these issues promptly and proactively, Paradise Pool Services can help prevent further damage, save their clients money, and keep their Swimming Pools  in great condition for years to come.

How to Lower pH Balance in Your Swimming Pool

Everything should be in balance. It is as essential in life as it is in your swimming pool. The pH of your pool is an excellent example.

As a general guideline, you should  keep your pH between 7.4 and 7.8   In this article, we’ll show you how to adjust pH if it becomes too high in this post.

Let’s get started!

Effects of a High pH Level

Why is a high pH level, or a pH level greater than 7.8, hazardous for your swimming pool? For starters, it’s bad for both the swimmers and your bank account. Here are some of the issues you might encounter:

  • Swimmers will complain about stinging eyes, dry skin, and a sticky feeling.
  • You’ll notice that the pool has grown foggy or overcast, which makes swimming less appealing.
  • At increasing pH values, chlorine becomes less effective. The expense of adding more chlorine is higher than the cost of pH test kits. Low chlorine levels encourage the growth of germs and algae.
  • Alkalinity makes water “hard,” and calcium deposits can induce scale development. Scale can clog your filters and pipes. This will put strain on your pool equipment and result in a variety of issues like leaks and motor failure.

How to Lower pH Levels

Always test your water before doing anything. Check the pH, acid demand, and total alkalinity of the pool with a pool test kit.

After determining that the pH level is too high, you should try to restore balance. There are two main pH lowering products. These are sodium bisulfate (dried acid) and muriatic acid.

The steps for each product are as follows:

Sodium Bisulfate

  1. Follow the manufacturer’s directions and measure the appropriate amount depending on your preliminary tests. Some advocate doubling the recommended amount to allow for easier correction.
  2. Sodium bisulfate is often sold as a powder. To avoid backlash to your skin and clothes, avoid using it on a windy day.
  3. Add the chemical by getting as close to the water as possible and downwind if it’s windy. Apply it on the water return jet site to help the powder distribute around the pool.
  4. After ten to fifteen minutes, the powder should dissolve on its own.
  5. Allow at least six hours for retesting, but complete your test within 24 hours.

Muriatic Acid

  1. Because muriatic acid is a strong corrosive, wear safety equipment such as gloves and goggles.
  2. Read the directions again and measure the amount as directed.
  3. Muriatic acid can be added to your pool in two ways. The first step is to turn off the pump and then slowly pour a steady stream into the deep end. Allow the acid to settle at the pool’s bottom before resuming circulation with the pump.
  4. The second way is to pour it over the return jets and let the pump do the rest.
  5. Retest the water after six hours, but no more than 24 hours.

With the Balance Restored, All Is Well

Every pool owner should know how to lower pH levels. However, if you don’t have the time or if it’s too much for you, give us a call ! 

We can do everything from pH level balancing to mechanical repairs, pool cleaning, and upkeep. We’ll make sure your swimming pool is constantly in great condition!

Why Opt for Professional Pool Cleaning In Coachella Valley?

There are numerous benefits to owning a pool. When the temperature rises too high in palm desert, you can cool down in the pool, it can keep you and your family active, and you can even organize the nicest parties there. 

But the pool needs to be properly cleaned if you want to continue taking advantage of these benefits. Additionally, it must be carried out frequently. Additionally, this entails going beyond merely scanning the surface or keeping an eye on the chemical balance. If you don’t keep up with the necessary maintenance, your pool will eventually become a safety risk. Therefore, you need to hire professional pool cleaning services to handle it for you.

Please examine these 5 benefits of hiring specialists as opposed to doing it yourself.

1. Experts Provide Options

Specialists know what to look for, which is a benefit of hiring them. When they arrive, they know where to start and stop. You decide how much they achieve. You choose which pool areas they clean and how often. Choose from monthly to weekly. Your pool will look great year-round.

2. Regular Maintenance Schedule 

It is considerably simpler to maintain crystal-clear, welcoming water when pools and accompanying equipment are regularly maintained. But as was already stated, this goes beyond simply scratching the surface. Professionals will also discuss such crucial topics as:

– Clean the automatic pool cover fabric

– Scrub the pool’s walls and tile border

– Check to see that the skimmer baskets and the pump are both clean.

– Make sure the water’s chemical balance is ideal – Vacuum

– Skim the surface and gather trash

– If necessary, check the backwash function and filter pressure.

3. Keep Pool Equipment Maintained And Running 

Most pool owners know only the basics of pool maintenance. You want to relax in the pool, not stress out. Professional pool cleaning is needed. They examine pumps and filters to ensure nothing burns out. Professionals can notice tiny issues that could grow. They can patch a rip without pricey approaches.

4. The Importance Of A Chemical Balance

Chemical levels become unbalanced practically immediately. Chemical imbalances cause bacteria and algae growth. Both are unhealthy. Strong chemicals can cause skin irritations. The unbalance could damage your pool equipment. Professional pool services exist for this reason. You may have a ph-balanced pool with the appropriate information and strategy.

5. Free Up Time And Save Money

If professionals maintain the pool and equipment, you can use them longer. They let you spend more time doing things you enjoy. It’s freeing to manage your own pool, yet irritating when things break. When burning eyes and lips make swimming unpleasant. 

Spend smartly and free up time.

Call now on (760) 880-0715


Upgrade the quality of your pool

Pool owners know that a well-maintained pool is the key to having a great time at the pool. But what do you do when your pool isn’t in top shape? Well, we’ve got some tips for improving the quality of your water and keeping it clean!

Pool Cleaning

Pool cleaning is a crucial part of keeping your pool in good shape. You need to clean it regularly so that the chemicals don’t build up and cause algae growth, which can affect the appearance of your pool. Regularly scheduled cleanings will also help prevent dirt from settling on the bottom of your pool, which could lead to discoloration or erosion problems.

To maintain a healthy swimming environment for yourself and others who use it:

  • Get rid of any debris from previous seasons by vacuuming or sweeping with an attachment on a vacuum cleaner (this should be done every few weeks). Use bleach when necessary; some people prefer bather soap instead because it doesn’t require rinsing off completely before coming back into contact with water again (this reduces wear-and-tear on equipment). If possible try not to use large amounts of chlorine tablets since they may harm plants near ponds where they’re being added; however if needed absolutely do so using only diluted amounts recommended by manufacturers’ instructions provided beforehand!

Filter Cleaning

As you know, the filter is a critical element of your pool’s health and safety. It prevents debris from getting into your pool water and keeps it clean. If it gets clogged up with waste or other materials, then these can cause algae growth in the water which leads to cloudy water and unpleasant odor.

To keep your filter clean, you should check for debris once every week or two weeks depending on how often you swim in your pool (or if there are any major changes). If there are too many particles floating around in the filter area when you do this checkup, then it might be time for some extra cleaning!

Maintain & Repair Pool Equipment

  • Check the filter and pump.
  • Check the heater.
  • Check the lights.
  • Check the pool liner, plaster and fabric.

Install & Repair Pool Equipment

  • Installation of new equipment
  • Repair of existing equipment
  • Replacement of broken parts
  • Replacement of worn out parts
  • Replacement of faulty parts

Keep your pool in top shape. Call now!

If you are ready to get your pool in tip-top shape, then call us today! We will be happy to schedule an appointment with you and come out as soon as possible. Our pool maintenance services are available 24/7, so there’s no need to worry about scheduling around work hours or having someone else do it for you.

We’ll make sure that everything is done by the time we arrive so that all of our efforts go toward keeping your swimming experience safe and enjoyable for years to come.

If you’re looking to have your pool up and running, contact us today! We’ll be happy to assist you with any questions or concerns you may have.

Pool Services

If you’re like most people, your pool is the biggest investment you’ll make in your home. And while it’s important to have a clean and healthy pool, it can also be a source of frustration if there are any issues affecting it. For example: algae. Algae can grow on anything in the water except for our hands and feet – which is why we need someone who specializes in removing algae from ponds and swimming pools!

Got Algae?

If you’re having trouble with algae, we can help. We offer a wide range of services to provide the best possible service for your pool. Our team of experts is trained to identify and treat any type of algae problem. In addition, we can help prevent it from happening in the first place by selecting the proper chemicals for your needs:

  • Algae Barrier Treatment – This treatment will keep harmful bacteria from growing on top of your pool’s surface film so that it doesn’t interfere with its health or appearance. It’s important to note that this process should be done once every week during warm weather months only!
  • Algaecide Treatment – This option kills off unwanted microorganisms which may cause harm if left unchecked over time due to their ability to replicate quickly under certain conditions (e., high pH levels).

Get Green Algae Rescue

Green Algae Rescue is a natural algae killer that is safe for humans, pets and plants. It’s made from all-natural ingredients, including seaweed and aloe vera gel. Green Algae Rescue has no toxins, so you don’t have to worry about it harming your fish or other aquatic life. It’s also non-toxic and biodegradable—meaning it won’t accumulate in the environment like other chemicals would!

Green Algae Rescue works by neutralizing ammonia from harmful microorganisms in ponds or tanks by breaking down their waste products into simpler ones that can be easily absorbed by plants or animals that live near those ponds/pools (like us). This process helps prevent harmful algae blooms while also boosting photosynthesis rates by increasing light exposure on leaves thanks to its nutrient absorption abilities.”

Pool service that is #1 in the industry.

Our expert pool service and repair technicians are the best in the industry. We use only top-of-the-line equipment, so you can rest assured that your pool will be maintained at its highest level of performance.

Our goal is to provide world class customer service for all of our customers, which is why we have been voted #1 for over 20 years!

Pool service that is #1 in the industry.

Can You Swim in a Pool with Algae?

Water that contains algae can be unsightly and potentially dangerous to swim in. So, why swim in your pool with algae? Because certain types of algae present themselves in poorly maintained water that lacks chemical balance and proper filtration. So read on to find out whether it’s safe or not to swim in a pool with algae.

How Algae Affects Swimmers

Swimming in a pool with algae can pose serious health risks. Algae is a breeding ground for dangerous bacteria, which can cause rashes on the skin or other infections. These bacteria are also capable of entering the body when swimming in contaminated water. Swimmers can contract cholera and some other bacterial infections if they swallow water from a pool that has algae present. So it’s important to wash off with soap and disinfect the surrounding area before entering your pool again.

How Algae Affects Pools

Pool algae is a diverse and problematic aquatic plant species that can affect your swimming pool. It can form green spots in your pool and cause your water to become cloudy. In murky pools, algae can also cause unwanted odors, staining, and corroding of pool surfaces. Algae are aggressive plants that spread quickly. Most importantly, they act as magnets for insects like mosquitos and other blood-sucking insects that can infest your entire yard or house if not treated properly.

But as long as you’re taking preventative measures, your pool will be free of most of the types of algae that develop. You’ll need to get rid of them from time to time and prevent them from returning.

How Often Should You Get a Pool Filter Cleaning?

When was the last time you cleaned your pool filter? If you can’t remember, it’s time to do it more often. This task is an integral part of pool maintenance and can help you avoid costly repairs later on.   You don’t have to be a pool owner to know that keeping the water clean is a must. It not only increases your pool’s lifespan but also protects against disease-causing bacteria and germs. That’s where pool filters come in.   These accessories trap small particles, debris, bugs, and other contaminants, removing them from the water. They also help prevent algae and bacteria growth.   Pool filter cleaning may not be the most exciting task, but it’s worth the effort. The question is: how often should you do it? Let’s find out!  

How Do Pool Filters Work?

As their name suggests, these pool accessories filter dirt particles and bacteria out of the water. They are effective at removing tiny insects, food particles, microorganisms, germs, and more. Their role is to keep your pool water clean and prevent contamination.   There are three main types of pool filters, and each has a different lifespan and mechanism of action. DE pool filters, cartridge filters, and sand filters are the most widely used models.   Choosing one over another comes down to your budget, pool volume, and pool equipment capacity.  

How Often Should You Clean the Pool Filters?

Each type of filter requires more or less maintenance and various requirements.   Apply a special filter cleaner every season — this will ensure proper water circulation and filtration.   Check the pressure gauge to figure out when it’s time to backwash; the more debris is in your filter, the higher the pressure will be.   If you have a cartridge filter, clean it weekly, monthly, or less frequently depending on its size and how often you’re using the pool. These types of filters don’t require backwashing, but you need to disassemble them every time they need cleaning.  

Is Pool Filter Cleaning Necessary?

Like everything else, pool filters are subject to wear and tear. Certain factors, such as poor maintenance, can accelerate this process and reduce their lifespan. Over time, debris and chemicals build up in the filter. Without proper cleaning, pool filters get clogged and become less effective. This results in cloudy water, bacteria growth, and poor water quality. Filters also play a crucial role in pool water circulation. They assist you to disperse your chemicals and guarantee that your pool has a clear pool area.  If the filters are clogged, you may experience problems with the pool pump too. It could back up and flood, causing a lot of damage. Regular pool filter cleaning can prevent costly repairs and infectious diseases. Whether you require a pool inspection, pool filter cleaning, or equipment repairs, our team can help. Contact us today for a free estimate!